Cam Kit - 487 - Chain Drive - Race Series Lifters - M8

Cam specs measured on the lifter @ 0.050 lift with 1.61 rocker arm ratio. Camshaft for 114" and 117" engine Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock Made in the USA Allows for installation of the factory one piece pushrods or optional Feuling® heavy duty HP+® 0.165 wall one piece pushrods Feuling® fastener kit is recommended to help prevent cylinder head cracking. 487 Reaper Camshaft Bolt in Responds very well to increased bore and or compression A high flow exhaust system and air cleaner is highly recommended for optimal performance. Cam Installation Kit Includes cam bearing, cam/crank hardware and gasket/O-ring kit Chain Drive Race Series lifters Hydraulic lifters have a full 0.200 of total travel Designed with a slower bleed down rate to handle heavy valve spring pressures Increase engine RPM before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the Milwaukee Eight front exhaust camshaft lobe flange 487 Reaper Chain Drive Camshaft, Cam Installation Kit and Race Series Lifters are included in this kit RPM range 2,250 - 6,1000 High Lift valve springs are required on stock cylinder heads, Screamin Eagle cylinder heads have high lift valve springs but will need to be verified. Heavy duty one piece pushrods are highly recommended. Feuling® does not recommend tuning beyond stock emissions standards. 38° overlap